Built in Our Own Shop, Delivered Ready to Install
Baltic Cabinets fabricates cabinetry and millwork for general contractors, builders, remodelers, and designers — boxes, doors, drawer fronts, panels, and counters cut to your drawings and your site conditions. Nothing is ordered from overseas and nothing is stock, so odd openings, tight ceilings, and out-of-square walls are a normal day’s work. Fabrication, delivery, and installation are all available from one shop.
One Shop for Boxes, Fronts, Panels, and Counters
We build cabinetry to your prints or ours: base and wall boxes, tall pantry and linen towers, drawer banks, vanity cases, reception and service counters, column wraps, slat screens, and finished panels. Everything is fabricated from high-quality plywood rather than cheap particle board, and because every part is cut in our own shop, a non-standard width or an odd ceiling height costs you a dimension change, not a redesign.
Contractors use us two ways. Some buy fabrication only and install with their own crews; others hand us the whole scope and we fabricate, deliver, and install. Either way, the team behind it carries 16 years of experience in the industry — from kitchen cabinetry to full hotel and office packages — with a dedicated specialist for measurement, shop drawings, fabrication, and install.
Send Us Your Drawings
Real Materials, Real Custom, Real Dates
A cabinet package that arrives late or arrives wrong stops everything behind it. Two things keep a trade job clean: what the parts are actually made of, and whether the shop can hit a size and a date without excuses.
High-Quality Plywood and Real Hardwood
Ask any cabinet shop what the boxes are made of and what species the fronts are — it is the fastest way to tell a lasting package from one that swells at the first spill. We build with high-quality plywood and quality hardwood because a cabinet that fails in three years becomes your callback, not ours.
Every job carries a minimum one-year workmanship warranty, with three to four years on manufacturer components. Contractors are welcome to come to the shop and look at the construction before committing to a package — that is the fairest way to compare us against a cheaper number.
100% Custom, So Odd Sizes Are Not a Problem
We are a fully custom shop. Nothing is pulled from a stock catalog and nothing is ordered from overseas, so a 31-inch opening, a sloped ceiling, or a column that sits three inches off the plan is handled in fabrication instead of being filled with a scribe strip on site.
That matters most on renovations and commercial buildouts, where field dimensions rarely match the drawing set. Panels get scribed, runs get grain-matched, and equipment openings are cut to the fixtures you actually bought. You can see the range of what that covers in our finished project photos.
We fabricate and sell to contractors, and we can deliver and install the same package if your crews are booked.
From First Call to Installed Package
Our team handles every stage, with a dedicated specialist for each step — so you always know who to call about a dimension, a finish, or a delivery date.
1. Call or Text the Shop
Tell us the scope, the site, and the timeline. Give us your drawings if you have them — if they are complete and accurate, we can quote from them.
2. Jobsite Meeting and Measurement
We meet at the site, gather the details and take field measurements. Estimates are free; measurement and inspection visits are quoted case by case.
3. Drawings and Estimate
We produce the shop drawings and send over a written estimate covering materials, hardwood species, hardware, and the scope of the install.
4. Fabrication, Delivery, Install
From estimate approval, the usual run is two to three weeks through fabrication, delivery, and installation — coordinated to your schedule on site.
What You Get That an Import Order Cannot Give You
Overseas and stock programs win on the first number and lose on everything after it — sizes you have to work around, finishes you cannot match, and a replacement part that is eight weeks out. Here is what buying from a local fabrication shop changes.
- Every part cut in our own shop — no overseas orders and no stock catalog limits
- High-quality plywood and quality hardwood instead of cheap board that fails early
- Odd sizes, sloped ceilings, and out-of-square walls handled in fabrication, not on site
- Minimum one-year workmanship warranty, with three to four years on manufacturer components
- Fabrication only, or fabrication with delivery and installation — your call per project
- 16 years of experience in the industry across residential and commercial work
What Contractors Ask Before the First Order
Both. We fabricate and sell to contractors, builders, and remodelers as well as working directly with homeowners. You can buy the fabrication alone and install it with your own crews, or hand us fabrication, delivery, and installation as one scope.
From estimate approval, the usual run is two to three weeks total through fabrication, delivery, and installation. Large commercial packages are scheduled around your site dates — tell us your install window when you request the quote.
High-quality plywood for the casework and quality hardwood on the fronts and exposed parts. A lot of companies use cheap material that does not last, so we encourage contractors to come to the shop and see the construction for themselves before ordering.
Yes. We are 100% custom and do all the fabrication ourselves, so odd sizes are completely fine. Nothing is limited to catalog dimensions, which is why renovation and commercial buildout work is a large part of what we build.
Estimates are free. Measurements are not automatically included — if you supply accurate drawings and field dimensions we can quote from those, otherwise measurement and inspection visits are charged case by case. Ask when you call and we will tell you which applies to your job.
A minimum one-year workmanship warranty from us, plus three to four years on manufacturer components. More answers are on our questions page.
Our shop is at 3806 Calhoon Ave, Chattanooga, TN 37407, and we deliver and install across the surrounding region — including Knoxville, Jasper, Nashville, and Atlanta. Call (423) 463-4165 with your jobsite address and we will confirm.
Send the Drawings, Get a Number, Lock the Delivery Date
Get a Trade Quote Schedule a Jobsite MeetingEstimates are free. Two to three weeks from approval through fabrication, delivery, and installation — get on the shop schedule before your install window.
Call or Text → Jobsite Meeting → Drawings and Estimate → Built and Installed